Safe-ion - protect your people, facilities and operations

Safe-ion - protect your people, facilities and operations

Modern broadcast production depends heavily on lithium-ion batteries. From cameras and wireless transmitters to lighting, drones, monitors and audio equipment, batteries power the flexibility and mobility that today’s production environments demand.

But while these batteries are essential, they also introduce a growing safety risk that many organisations overlook.

Lithium-ion batteries can fail. When they do, the results can be severe, fires that ignite quickly, burn intensely and are extremely difficult to control.

For broadcasters storing dozens or even hundreds of batteries across studios, production facilities and OB vehicles, the risk increases significantly and this is where proper storage becomes critical. 

Many facilities store these batteries together, often charging or rotating them constantly during production cycles.

If a single lithium-ion battery enters thermal runaway, it can trigger a chain reaction with neighbouring batteries. Fires can escalate quickly, potentially damaging expensive equipment, shutting down operations or putting staff at risk.

The question is no longer if lithium-ion batteries are present in broadcast environments, it’s how safely they are stored.

 

Containing the Risk

Specialised lithium-ion battery safes are designed specifically to manage these risks.

Safe-ion battery safes are engineered to contain battery fires and explosions, preventing them from spreading to the rest of the facility.

Tested by the renowned German testing institute MPA Dresden, these safes are designed to keep the effects of a battery fire contained inside the safe itself.

That containment can be the difference between a manageable incident and a catastrophic facility fire.

 

Designed for Fire Safety

Safe-ion safes are fire-resistant and tested during development according to VDMA 24994, a standard specifically focused on lithium-ion battery storage and charging safety.

This ensures that if a battery failure occurs inside the safe:

  • Fire is contained
  • Explosions are kept inside the enclosure
  • Damage to the wider facility is prevented

For broadcast organisations with high-value equipment and critical uptime requirements, this level of protection is essential.

 

Protecting More Than Just Equipment

Safety in broadcast environments isn't only about protecting gear — it's about protecting people, facilities and operations.

Battery fires can:

  • Destroy expensive production equipment
  • Cause extended operational downtime
  • Trigger insurance claims and investigations
  • Put staff at serious risk

Safe-ion safes provide an additional layer of protection that helps organisations reduce these risks significantly.

 

Built for Security and Flexibility

Beyond fire protection, Safe-ion safes are also designed with practical operational needs in mind.

Burglary protection is built into the design through heavy-duty hinges and secure locking systems. Safes can even be integrated into existing building key systems for easier access management.

Modular construction means safes can be customised to suit the specific needs of each organisation — whether storing small portable batteries or larger production power packs.

 

Why Safe-ion?

Supporting Compliance and Insurance Requirements

Safety standards and insurance expectations around lithium-ion battery storage are tightening.

Safe-ion safes are designed to comply not only with current regulations but also with the additional requirements set by many insurance providers.

For broadcast companies, this can help ensure:

  • Regulatory compliance
  • Improved insurance alignment
  • Demonstrable safety management practices

  

Fireproof Safe-ion safes guarantee optimal fire safety and protection for your organisation. Tested during development according to VDMA 24994.

Burglary proof Thanks to the heavy-duty hinges and locks, maximum burglary protection is guaranteed. The safe can be integrated into building key lock systems for convenience.

Customisation The Safe-ion safes are modularly constructed and can be customised as required.

Complies with the rules The Safe-ion safes not only comply with current regulations, but also with the additional requirements of many insurance companies.

 

What does a Safe-ion Lithium-Ion battery safe do if a battery ignites?

When batteries are charged in the safe with the doors closed, the smoke/heat detector monitors the process. In case of a problem, a loud alarm sounds and a red light flashes on the safe. If the safe is connected to your PAC system, the alert is forwarded to the control centre. Simultaneously, the power is automatically cut off, stopping the charging process immediately. This gives you ample time to alert the fire department and your staff. If the safe’s smoke exhaust is connected to your ventilation system, the toxic fumes will be vented outside.

 

Convenience and security with the Safe-ion lithium-ion battery safes

The operation is very straightforward: open the safe and place the battery on the charger. Since the chargers remain inside the safe, you can be sure you are always using the original charger.

It is crucial to always keep the battery safe door closed. If a battery catches fire, the flames will be contained within the safe only if the doors are closed. If you leave the door open, a loud alarm will sound after a short time to remind you to close the door.

 

Custom battery storage safes

Safe-ion have developed fire safety safes that contain lithium-ion battery fires and explosions within the safe, reducing fire damage to buildings and stores. These safes enable the safe storage and charging of batteries. Thanks to their modular design, these heavy-duty fire safety safes can be customised to meet specific needs.

 

Lithium-Ion battery safe - Safe 8 and Safe 10

The Safe 8 and 10 fire-resistant battery safes allow you to safely store and charge lithium-ion batteries. These compact entry-level models come equipped with an integrated warning system and feature eight or ten charging points. These safes have been tested by MPA Dresden for fire resistance and the overpressure released during explosions with Lithium-ion batteries. This testing was conducted during the development of VDMA 24994.

The Safe-ion Lithium-ion battery safes are equipped with a mechanical ventilation system. This fire-resistant ventilation grille consists of a frame and slats filled with thermo-expansive material. When the temperature exceeds 100°C, the vent will close and seal itself.

Specifications Safe 8 & Safe 10

  • Provided with CE marking
  • Fire-resistant battery safe for safe storage and charging of Lithium-Ion batteries
  • Approved by Dutch insurance companies
  • Integrated warning system with smoke detector and siren (for when the safe door remains open)
  • Thanks to the heavy hinges and locks, maximum burglary protection is guaranteed
  • External dimensions (8) 1255x711x580mm
    Internal dimensions (8) 1034x546x418 mm
  • External dimensions (10) 1708x711x580 mm
    Internal dimensions (10) 1487x546x418 mm
  • Voltage: 230 volt
  • Number of wall sockets: 8 or 10

 

Lithium-Ion battery safe - Safe 16 and Safe 20

Offering the same benefits as the Safe 8 & 10, Safes 16 & 20 offer protection on a larger scale. Safe-ion Lithium-ion battery safes are equipped with a mechanical ventilation system including a fire-resistant ventilation grille consisting of a frame and slats filled with thermo-expansive material. When the temperature exceeds 100°C, the vent will close and seal itself.

The Safe 20 Lithium-ion battery safe allows for the addition of backpack battery compartments, enabling secure and organised storage within the safe. This feature is available for the entire safe or for half of the safe.

Specifications Safe 16 & Safe 20

  • Provided with CE marking, already required and approved by Dutch insurance companies
  • Successfully tested for Lithium-ion battery fire by MPA Dresden
  • Complies with PGS 37
  • Integrated warning system with smoke detector and siren (for when the safe door remains open)
  • Thanks to the heavy hinges and locks, maximum burglary protection is guaranteed
  • Metered charging system, no need to adjust fuse box
  • External dimensions (16) 1950x940x585 mm
    Internal dimensions (16) 1760x801x392 mm
  • External dimensions (20) 1950x1250x585 mm
    Internal dimensions (20) 1785x1110x390 mm
  • Voltage: 230 volts or 400 volts
  • Number of wall sockets: 16 or 20
  • Optional electronic lock: Yes
  • backpack-battery compartment: only available for the safe 20
  • Extendable shelves: only available for the safe 20
This email address is being protected from spambots. You need JavaScript enabled to view it.
.

Contact Us

Enquire about our services today